Machine Models
SpinTrak™ family of Spinneret Inspection systems inspects Spinnerets for defects in capillaries. Capillary defects which result in slow holes, drips, stoppages, dog legs, short life are detected. Such defects include dirt, carbon build up, additive build up, blockage, damage and edge wear. By ensuring that Spinnerets are free from capillary defects, SpinTrak™ eliminates Spinneret failures and maximizes Spinneret run time. Thus plant productivity and profits are increased. SpinTrak™ Spinneret inspection systems received a Recognition Award for Superior Technology and Fast Cycle Time from E.I. du Pont de Nemours & Company.
See below our latest SpinTrak™ models currently available
The SpinTrak™ family of Spinneret inspection systems are specifically designed to inspect all types of fiber extrusion spinneret/dies used in filament yarn, staple fiber, spunbond, meltblown and spunlace applications. To accommodate various Spinneret sizes and configurations, the SpinTrak™ is available in a variety of models. The three configurations available are the Bench top, Table top and Floor standing units.
Benchtop Model
The Benchtop unit is mainly used for filament and staple fiber spinning. In Benchtop units, the microscope moves to each capillary location and the Spinneret (one or more depending on the Benchtop size) is held securely onto a sturdy holding fixture. The Benchtop units are offered in different sizes and speeds. The size and speed recommended depends on the number of spinnerets required to be inspected, the sizes of the spinnerets and the degree of automation desired depending on the budget. For example, if the spinnerets are smaller size and more automation is desired, the largest unit would be recommended.
– Aspex’s smallest model
— Aspex’s most affordable model
— Used in 100’s of plants worldwide
Machine Models
See Below Our Machine Models Products :
The SpinTrak™ family of Spinneret inspection systems are specifically designed to inspect all types of fiber extrusion spinneret/dies used in filament yarn, staple fiber, spunbond, meltblown and spunlace applications. To accommodate various Spinneret sizes and configurations, the SpinTrak™ is available in a variety of models. The three configurations available are the Bench top, Table top and Floor standing units.
Benchtop Model
The Benchtop unit is mainly used for filament and staple fiber spinning. In Benchtop units, the microscope moves to each capillary location and the Spinneret (one or more depending on the Benchtop size) is held securely onto a sturdy holding fixture. The Benchtop units are offered in different sizes and speeds. The size and speed recommended depends on the number of spinnerets required to be inspected, the sizes of the spinnerets and the degree of automation desired depending on the budget. For example, if the spinnerets are smaller size and more automation is desired, the largest unit would be recommended.
– Aspex’s smallest model
— Aspex’s most affordable model
— Used in 100’s of plants worldwide
Bench Top Model
Insp. Area (mm x mm)
Speed (seconds per cap)
Most common Application
B25
250×250
0.3-1.25
Yarn/staple
B40
400×500
0.3-1.25
“
B90
500×900
0.3-1.25
“
English
العربية
简体中文
Nederlands
Français
Deutsch
हिन्दी
Italiano
日本語
한국어
Português
Русский
Español
ไทย