CAll Us: +1(212)-966-0410

Machine Models

SpinTrak™ family of Spinneret Inspection systems inspects Spinnerets for defects in capillaries. Capillary defects which result in slow holes, drips, stoppages, dog legs, short life are detected. Such defects include dirt, carbon build up, additive build up, blockage, damage and edge wear. By ensuring that Spinnerets are free from capillary defects, SpinTrak™ eliminates Spinneret failures and maximizes Spinneret run time. Thus plant productivity and profits are increased. SpinTrak™ Spinneret inspection systems received a Recognition Award for Superior Technology and Fast Cycle Time from E.I. du Pont de Nemours & Company.

See below our latest SpinTrak™  models currently available

The SpinTrak™ family of Spinneret inspection systems are specifically designed to inspect all types of fiber extrusion spinneret/dies used in filament yarn, staple fiber, spunbond, meltblown and spunlace applications. To accommodate various Spinneret sizes and configurations, the SpinTrak™ is available in a variety of models. The three configurations available are the Bench top, Table top and Floor standing units.

Machine Models

SpinTrak™ family of Spinneret Inspection systems inspects Spinnerets for defects in capillaries. Capillary defects which result in slow holes, drips, stoppages, dog legs, short life are detected. Such defects include dirt, carbon build up, additive build up, blockage, damage and edge wear. By ensuring that Spinnerets are free from capillary defects, SpinTrak™ eliminates Spinneret failures and maximizes Spinneret run time. Thus plant productivity and profits are increased. SpinTrak™ Spinneret inspection systems received a Recognition Award for Superior Technology and Fast Cycle Time from E.I. du Pont de Nemours & Company.

See Below Our Machine Models Products :

The SpinTrak™ family of Spinneret inspection systems are specifically designed to inspect all types of fiber extrusion spinneret/dies used in filament yarn, staple fiber, spunbond, meltblown and spunlace applications. To accommodate various Spinneret sizes and configurations, the SpinTrak™ is available in a variety of models. The three configurations available are the Bench top, Table top and Floor standing units.

Tabletop Model

Mainly used for filament, fiber spinning & specialty applications (like Aramids and carbon fiber).  In Table Top units, the microscope does not move and the Spinneret is moved into the inspection position for the microscopic inspection. This model offers higher inspection speeds and inspects similar to a benchtop model.  Aspex Incorporated recommends this unit as an alternative to the benchtop model in certain circumstances depending on the type of spinnerets, required inspection capacity and especially the distance between the capillaries.

– The Tabletop is faster than the Benchtop unit

– It is small and highly accurate

Tabletop Model

Mainly used for filament, fiber spinning & specialty applications (like Aramids and carbon fiber).  In Table Top units, the microscope does not move and the Spinneret is moved into the inspection position for the microscopic inspection. This model offers higher inspection speeds and inspects similar to a benchtop model.  Aspex Incorporated recommends this unit as an alternative to the benchtop model in certain circumstances depending on the type of spinnerets, required inspection capacity and especially the distance between the capillaries.

– The Tabletop is faster than the Benchtop unit

– It is small and highly accurate

Table Top Model

Insp. Area (mm x mm)

Speed (seconds per cap)

Most common Application

T25

250×250

0.3

Yarn/staple

T35

350×350

0.3